Monday, December 13, 2004

How To Put Together Your Paintball Gun

When putting your paintball gun together the first thing you want to do is make sure you have all of your equipment ready. Then, screw the barrel in. When it is all the way in it should not wiggle or unscrew easily. Once you've done this, make sure your barrel plug is in the barrel. Next, take your elbow and place it over your feed-tube (if it is an adjustable elbow, make sure the bottom screw is tight so that it doesn't come loose). Then, take your hopper and place it into the other end of the elbow, making sure that the lid is facing you (if it's an adjustable elbow, make sure the top screw is tight so that the hopper does not fall out). Next, take your C02 tank and screw it into the fitting at the bottom of the handle. Once you've done this, make sure that your safety is ON. Now you're almost ready to play. You just need to put paintballs into your hopper. When you put your paintballs into your hopper, you want to fill it almost all the way. If you have a vertical feed, and a gun that's prone to splitting paintballs, you might want to put paintballs in one by one, until the elbow is full. Now you're ready to play--remove the barrel plug, turn the safety off, and start shooting!

0 Comments:

Post a Comment

<< Home